Description

Gateway DIN Mount combines a high power SignalFire radio with gateway electronics in a compact DIN mounted module with external SMA antenna connections for installation flexibility in remote monitoring applications. The DIN Mount Gateway is designed for users that want to use their own antenna or do not need the mounting flexibility typically offered in the standard Gateway-in-a-Stick configuration.  Housed in a narrow (~1 inch) wide module, the Gateway DIN Mount operates over long ranges (+3 miles), storing the most recent readings of all nodes in the network in Modbus format.

An RP SMA connector is provided to connect to an external antenna that can be configured via an RS232 DB9 connector. Modbus RTU (RS485) and TCP (with Ethernet module) are used for remote asset data monitoring and control. The DIN Mount Gateway contains an ARM processor capable of holding all remote data registers as well as providing outbound control of the remote assets via the SignalFire wireless mesh network.

Technical Specifications
OPERATING TEMPERATURE:

-40 – 85ºC

HUMIDITY:

0 – 100% condensing

POWER:

6-36 VDC

DATA INTERFACE:

RS-485 Modbus RTU, or Modbus-TCP, RS 232 for configuration.
All readings are converted to Modbus registers and stored in the gateway.

RADIO POWER:

500 mW

ANTENNA TYPE:

Omnidirectional

ANTENNA GAIN:

5dB

RECEIVE SENSITIVITY:

-105 dB

FREQUENCY:

902-928 MHz license-free ISM band compliant with FCC Part 15.

RANGE:

3 miles (typical) much farther with careful placement.

NETWORKS:

Up to 240 separate networks.

ENCLOSURE:

Weathertight, integrated electronics and antenna. Integrated cable (25′ standard), NEMA 3R (GW Stick).

SAFETY RATING:

Non-incendive, Class 1 Division 2 Groups C and D, T5.

INTERNAL DIAGNOSTICS:

Line voltage, signal strength, error conditions event logging.

Downloads