The TA turbine flow meter is an excellent choice for pre-process food and beverage applications that require high accuracy without 3-A approval. This meter comes with Tri-Clamp process fitting making it ideal to use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications. Their 316L stainless steel construction provides a durable and cost-efficient flow measurement system that offers excellent accuracy and repeatability.

Key features

  • Measuring Accuracy:
    ±1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
  • 9 Flow Ranges:
    0.6 to 400 GPM
  • Pressure Rating:
    up to 1,000 PSI
  • Temperature Rating:
    -150˚ to 300˚F (-100˚ to 149˚C)
Price

Description

The TA turbine flow meter is an excellent choice for pre-process food and beverage applications that require high accuracy without 3-A approval. This meter comes with Tri-Clamp process fitting making it ideal to use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications. Their 316L stainless steel construction provides a durable and cost-efficient flow measurement system that offers excellent accuracy and repeatability.

Durable & Cost Effective: This meter’s rugged 316 stainless steel construction provides a durable and economic flow metering solution.

Excellent Accuracy: The TA turbine flow meter can achieve a flow accuracy up to 1.0% of reading and is repeatable up to 0.1%.

Flexible: This meter is available in nine different flow ranges, covering flows from 0.6 GPM up to 400 GPM.

Easy Installation: Equipped with Tri-Clamp process fittings, this meter is ideal for use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications.

Versatile: This flow meter provides local flow rate and volume totalization and will interface with most displays, controllers and computers.

Technical Specifications
Measuring Accuracy:

± 1.0% of reading or better (±1% of reading over the upper 70% of the measuring
range for 3/8, 1/2 and 3/4 in. meters)

Repeatability:

± 0.1%

Flow Measuring Ranges:

.6 to 3
.75 to 7.5
.75 to 7.5
2 to 15
3 to 30
5 to 50
15 to 180
40 to 400

Turn Down Ratio:

10:1

Maximum Operating Pressure:

1000 psi (sanitary clamp rated at 250 psi at 300°F)

Maximum Operating Temperature:

Fluid temperature up to 300°F

Electrical Connection:

NEMA 6 Connector

End Connections:

Tri-clamp

Materials of Construction:

Body:  316L Stainless Steel
Rotor Support:  316L Stainless Steel
Rotor:  Nickel Plated Stainless Steel
Bearings:  Nickel Bindery Tungsten Carbide

Electronics
Transmitters & Controllers:
Downloads