Gear Meters
Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Fluid Power / Hydraulics
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
Operating Temperature:
-40°F to 140°F (-40°C to 60°C)
Power:
3 x D Lithium battery pack. Field replaceable. Class I Div 1 certified when used with SignalFire system.
Battery Life:
1-10 years, depending on sensor type and reporting frequency
Sensor Type:
Passive inductive flow sensor.
Data Update Rates:
User-configurable (5 sec – 1 hr)
Radio Power:
40 mW
Range:
Up to 1/2 mile
Antenna Type:
Internal weather resistant, omnidirectional
Frequency:
902-928 MHz, FHSS, license-free
ISM band compliant with FCC Part 15
Networks:
Up to 64 separate networks
Intrinsically Safe:
- Details of Class I, Div 1,
- Temp Code T3, Groups C&D
- Conforms to UL Std. 913
- Certified to Can/CSA Std. C22.2 No 157
Internal Diagnostics:
Battery voltage, signal strength, error conditions
Humidity:
0% to 100% condensing
Gear Meters:
- Model: JV#-20TC | Flow Range: 0.03 to 2.0 GPM
- Model: JV#-30TC | Flow Range: 0.1 to 7.0 GPM
- Model: JV#-60TC | Flow Range: 0.1 to 20.0 GPM
- Model: JV#-20BB | Flow Range: 0.03 to 2.0 GPM
- Model: JV#-30BB | Flow Range: 0.1 to 7.0 GPM
- Model: JV#-60BB | Flow Range: 0.1 to 20.0 GPM
- Model: JV#-80BB | Flow Range: 0.5 to 60.0 GPM
- Model: JV#-90BB | Flow Range: 1.0 to 120.0 GPM
Turbine Meters:
- Model: TRG-11.250-5 | Flow Range: 0.08 to 0.4 GPM
- Model: TRG-11.300-5 | Flow Range: 0.13 to 1.06 GPM
- Model: TRG-11.375-5 | Flow Range: 0.3 to 2.5 GPM
- Model: TRG-11.500-5 | Flow Range: 0.9 to 8.0 GPM
- Model: TRG-11.750(-5) | Flow Range: 1.6 to 11.5 GPM
- Model: TRG-11.880 | Flow Range: 3.2 to 32.0 GPM
- Model: TRG-1110 | Flow Range: 5.3 to 53.0 GPM
- Model: TRG-1120L | Flow Range: 13.0 to 200.0 GPM
The SignalFire Remote Sensing System consists of nodes attached to sensors like the SFS-WP Wireless Flow Transmitter that work in a mesh network pattern to send data via Modbus to a Gateway, where it is transferred to a PC, PLC, or other control system.
COMPONENTS NEEDED IN SIGNALFIRE REMOTE SENSING SYSTEM:
- SFS-WP Intrinsically Safe Wireless Flow Transmitter
- JV-KG, JV-CG, or TRG Flow Meter
- Gateway Stick or Gateway DIN Mount
- SignalFire Toolkit Software (free download)
- USB Serial DB9 Configuration Cable
- USB 4-pin Node Configuration Cable
Gateway Interfaces Include:
- HART®
- 4-20mA current loop, 1-5 Volt
- Digital input (state, counter, totals, frequency)
- RS-485/Modbus
For more information on the SignalFire Remote Sensing System, visit the SignalFire website HERE.
Attractive ROI
Costs less than running 60 feet of wire & conduit.
Data at Your Fingertips
Wireless data transmission anywhere in the world with an Internet connection.
Up and Running in Minutes
Easy thread-in installation. A quick setup procedure allows you to have the unit working with just a few simple programming steps.
Reliable Transmission
ISM bands sustain signal strength through terrain, structures or weather for a range of up to 1/2 mile.
Real-World Applications
The JV-BB and its predecessor JV-KG have been installed on hundreds of chemical injection skids throughout the Gulf of Mexico and beyond for decades. The robust construction and resilient materials of construction lend this meter perfectly to this application. With high accuracy and tolerance of pulsing flows, this meter out-performs the competition in some of the harshest environments in the world.
Hydraulic Test Stands
The JV-BB gear meter is ideal for hydraulic test stands due to its high accuracy and repeatability, which ensure precise measurement of fluid flow under varying conditions. Its robust design withstands the high pressures and temperatures typical in hydraulic systems. It can handle a wide range of viscosities and flow disturbances and its compact size and lack of need for straight run installation make it versatile and easy to integrate into complex hydraulic setups.
Onshore Chemical Injection Systems
Although onshore chemical injection systems are installed on land, at ground level, and in more stable conditions, they are still exposed to weather, varying temperatures, dust, and potential exposure to industrial pollutants. The JV-BB gear meter is still the best choice for its high accuracy and repeatability for consistently precise dosing of the valuable chemicals. Additionally, they handle a wide range of viscosities and flow rates.
Marine Fuel Monitoring
The JV-BB gear meter is ideal for marine fuel monitoring due to its robust construction, ensuring durability in harsh environments. Its repeatable accuracy ensures consistent measurements, crucial for fuel management. Unlike many meters, it doesn’t require a straight run for installation, offering flexibility in the often confined spaces of marine vessels. Additionally, its ability to detect flow in both directions ensures reliable monitoring, making it perfect for comprehensive marine fuel management systems.
The JV-BB and its predecessor JV-KG have been installed on hundreds of chemical injection skids throughout the Gulf of Mexico and beyond for decades. The robust construction and resilient materials of construction lend this meter perfectly to this application. With high accuracy and tolerance of pulsing flows, this meter out-performs the competition in some of the harshest environments in the world.
Hydraulic Test Stands
The JV-BB gear meter is ideal for hydraulic test stands due to its high accuracy and repeatability, which ensure precise measurement of fluid flow under varying conditions. Its robust design withstands the high pressures and temperatures typical in hydraulic systems. It can handle a wide range of viscosities and flow disturbances and its compact size and lack of need for straight run installation make it versatile and easy to integrate into complex hydraulic setups.
Onshore Chemical Injection Systems
Although onshore chemical injection systems are installed on land, at ground level, and in more stable conditions, they are still exposed to weather, varying temperatures, dust, and potential exposure to industrial pollutants. The JV-BB gear meter is still the best choice for its high accuracy and repeatability for consistently precise dosing of the valuable chemicals. Additionally, they handle a wide range of viscosities and flow rates.
Marine Fuel Monitoring
The JV-BB gear meter is ideal for marine fuel monitoring due to its robust construction, ensuring durability in harsh environments. Its repeatable accuracy ensures consistent measurements, crucial for fuel management. Unlike many meters, it doesn’t require a straight run for installation, offering flexibility in the often confined spaces of marine vessels. Additionally, its ability to detect flow in both directions ensures reliable monitoring, making it perfect for comprehensive marine fuel management systems.
We work with you to increase process efficiency, reduce costly production down-time, establish real-time monitoring and control, and provide the critical tracking and record keeping necessary to meet EPA regulations.
Practical Experience
- Chemical Injection
- Water Separation
- Subsea Operations
- Oil Field Management
- Hydraulic Fracturing (Fracking)
- Hydraulic System Monitoring
- Valve Actuation / Blowout Prevention
- Fuel Measurement
- Custody Transfer
A One-Stop-Shop for Industrial
Flow Measurement.
From quotation to commissioning & startup, we want to make every step simple and quick.
