The TA turbine flow meter is used in plants around the world, where clean-out-of-place (COP) and sanitize-out-of-place (SOP) is required.
The TA turbine flow meter is an excellent choice for pre-process food and beverage applications that require high accuracy without 3-A approval. This meter comes with Tri-Clamp process fitting making it ideal to use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications. Their 316L stainless steel construction provides a durable and cost-efficient flow measurement system that offers excellent accuracy and repeatability.
Key features
-
Measuring Accuracy:±1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
-
9 Flow Ranges:0.6 to 400 GPM
-
Pressure Rating:up to 1,000 PSI
-
Temperature Rating:-150˚ to 300˚F (-100˚ to 149˚C)
-
Description
The TA turbine flow meter is an excellent choice for pre-process food and beverage applications that require high accuracy without 3-A approval. This meter comes with Tri-Clamp process fitting making it ideal to use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications. Their 316L stainless steel construction provides a durable and cost-efficient flow measurement system that offers excellent accuracy and repeatability.
Durable & Cost Effective: This meter’s rugged 316 stainless steel construction provides a durable and economic flow metering solution.
Excellent Accuracy: The TA turbine flow meter can achieve a flow accuracy up to 1.0% of reading and is repeatable up to 0.1%.
Flexible: This meter is available in nine different flow ranges, covering flows from 0.6 GPM up to 400 GPM.
Easy Installation: Equipped with Tri-Clamp process fittings, this meter is ideal for use in clean-out-of-place (COP) and sanitize-out-of-place (SOP) applications.
Versatile: This flow meter provides local flow rate and volume totalization and will interface with most displays, controllers and computers.
Measuring Accuracy:
± 1.0% of reading or better (±1% of reading over the upper 70% of the measuring
range for 3/8, 1/2 and 3/4 in. meters)Repeatability:
± 0.1%
Flow Measuring Ranges:
.6 to 3
.75 to 7.5
.75 to 7.5
2 to 15
3 to 30
5 to 50
15 to 180
40 to 400Turn Down Ratio:
10:1
Maximum Operating Pressure:
1000 psi (sanitary clamp rated at 250 psi at 300°F)
Maximum Operating Temperature:
Fluid temperature up to 300°F
Electrical Connection:
NEMA 6 Connector
End Connections:
Tri-clamp
Materials of Construction:
Body: 316L Stainless Steel
Rotor Support: 316L Stainless Steel
Rotor: Nickel Plated Stainless Steel
Bearings: Nickel Bindery Tungsten CarbideTransmitters & Controllers:
- TA Turbine Datasheet
- TA Turbine Manual
- MAG-INVA NEMA-6 Pickup Drawing.pdf
- Turbine Filtration chart
- Application Story Sanitary Filling – Automated Water Bottle Line