Gear Meters Gear Meters
Variable Area Meters Variable Area Meters
Coriolis Mass Flow Meters Coriolis Mass Flow Meters
Paddle Wheel Flow Meter Paddle Wheel Flow Meter
Helical Flow Meters Helical Flow Meters
Turbine Flow Meters Turbine Flow Meters
Ultrasonic Flow Meters Ultrasonic Flow Meters
Flow Electronics Flow Electronics
Rotary Piston Rotary Piston
Turbidity Sensor Turbidity Sensor

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Aerospace

AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.

News July 26, 2018

AW-LAKE COMPANY AND KEM INTRODUCE NEW FLOW TRANSMITTER WITH DIGITAL SIGNAL PROCESSING AND RESTRUCTURED TRICOR CORIOLIS PRODUCT PORTFOLIO

Oak Creek, Wisconsin and Karlsfeld, Germany – July 25, 2018. Sister companies AW-LAKE COMPANY and KEM Küppers Elektromechanik GmbH (KEM) announce the expansion of their TRICOR line of Coriolis Mass Flow Meters that now includes both standard and advanced flow meters and the addition of the TCD 9000 Series Transmitters that incorporate digital signal processing (DSP).

The TCM “CLASSIC” Series meets general industrial requirements out of the box while the TCMP “PRO” Series offers environmentally-hardened units with advanced performance specifications and diagnostic capabilities for operation in challenging environments.

The TCM CLASSIC Series includes:

TCE 8000 transmitters with an easy-to-use interface
Economically-priced, standard calibration
Optional custom-calibrated meters with high performance specifications

The TCMP PRO Series includes:

TCD 9000 transmitters with digital signal processing and advanced diagnostics
Applicable for challenging liquid fluid conditions
Strong logging and traceability functions
Report fraction concentrations of two-part mixtures
Flexible I/O configurations 1-4 channels fully configurable with programmable I/O options

The new TCD 9000 Series of transmitters offers greater robustness, performance, diagnostics, and connectivity options. With a modern HMI interface and a strong logging functionality, the DSP transmitters provide users with an efficient configuration and analysis tool.

Other significant features of the TCD 9000 Series Transmitters include:

Higher flow and density accuracy
Improved zero stability
Higher immunity against process noise
Gas void fraction improvement
Extremely fast response
Application adaptive filtering
Greater temperature stability
Sensor checking and troubleshooting wizards

Operating from one universal power supply (24 V to 240 V), the TCD 9000 Series Flow Transmitters feature a large graphical display, SD card connectivity as well as logging and traceability functions. Units are available with direct or remote mounts and Profibus PA, Profibus DP, Modbus, or HART communication protocols. The transmitter is also available with Modbus only communication without display.

The flow transmitters feature a SD card to access internal storage information such as configuration details, calibration protocols and manuals. Operators can also access log data and configure operating parameters via the SD card and change TCD firmware in the field. TCD 9000 Series Transmitters are designed for numerous product certifications and developed for hazardous areas.

“Offering advanced diagnostics, logging and traceability functions, the TCD 9000 Series Flow Transmitters provide for a robust meter solution that addresses broader applications while delivering greater performance. We now offer a scalable meter portfolio to serve our customers’ economic and technical requirements,” explains Marius Merten, TRICOR Coriolis Product Manager.

For more information, visit the website at www.tricorflow.com or contact Marcia Reiff, Marketing Manager, at 800-850-6110, e-mail mreiff@aw-lake.com.