Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
Click To See More
Gear Meters
Subsea Gear Meter
Our Subsea Gear Meters are available in a wideย variety of flow ranges and electrical outputs,ย as well as a variety of exotic materials forย highest corrosion resistance and materialย compatibility. Depending on your needs,ย we offer both spur gear and rotary pistonย designs. Electronics are bolted onย and sealed to withstand externalย pressures and temperatures.
The Subsea Positive Displacement Flow Meters are available in a wide variety of flow ranges and electrical outputs, as well as a variety of exotic materials for highest corrosion resistance and material compatibility. AW-Lake Company’s Subsea PD Flow Meters are suitable for subsea drilling operations, blowout prevention, ROV maintenance, valve actuation, or subsea chemical injection. Construction materials, output signal, connection type, and physical footprint and weight are fully adjustable. Plus, both spur gear and rotary piston designs are also available.
Operating Depth:
up to 10,000 feet (3 km)
Working Pressure:
Internal up to 15,000 psi (1,035 bar), external up to 8700 psi (600 bar)
Flow Ranges:
from .001 GPM to 7 GPM @30 cP
Water Temperature:
as low as -40°F (-40°C)
Turndown:
400:1 with linearization
Communications:
Analog (4-20mA, Pulse, HART, MODBUS, Foundation Fieldbus
Connections:
NPT, Autoclave, ANSI flanges, Grayloc Hubs, Galperti Hubs, Techlok Hubs. More on request.
Accuracy:
±0.5% of measured value. A calibration certificate is provided based on a representative viscosity fluid for the application.
Repeatability:
±0.1%
Below are some of the possible materials; consult factory for a complete list of material offerings.
Body: 316L stainless steel (standard), titanium, duplex, super duplex and 17-4PH steel
Rotor: Super duplex (standard), anti-galling stainless steel (AG, Nitronic 60) Titanium (Ti) or carbon graphite.
Seal: FPM O-rings. Also available in FFKM, FEP-covered silicon, PTFE, Inconel and MSE polymer
Bearings & Shaft: Tungsten Carbide (gear meter only)
In subsea drilling operations, the Subsea Gear Meter is essential for accurately measuring the flow rate of drilling fluids, ensuring optimal performance and safety. Installed within the subsea control system, the gear meter is crucial for monitoring and adjusting the flow of hydraulic lubricants. The gear meter’s sealed electronics and robust and reliable design ensures it can withstand the harsh subsea environment, providing critical information to operators for effective and safe drilling operations.
Blowout Prevention
Snubbing operations typically involves valve actuation during well shut-in. Due to the bi-directional nature of the hydraulic flow in actuator lines, they require meters that can read in both directions and provide encoder-like counts for position indication. The Subsea Gear Meter meets the challenges of this, as well as the harsh environmental conditions and often sour service with high H2S levels due to its robust materials of construction.
ROV Operation
Remotely Operated Vehicles (ROVs) provide a means for oil drilling companies to perform maintenance on subsea equipment, enhancing efficiencies and safety. Incorporated into these RVs are specialized instruments and tools to perform functions at the sea floor, such as valve actuation. The Subsea Gear Meter is built to withstand the extreme conditions of deep water operations at depths up to 10,000 ft and internal pressures up to 15,000 psi.
Subsea Chemical Injection
description
Subsea Valve Actuation
description
Subsea Drilling Operations
In subsea drilling operations, the Subsea Gear Meter is essential for accurately measuring the flow rate of drilling fluids, ensuring optimal performance and safety. Installed within the subsea control system, the gear meter is crucial for monitoring and adjusting the flow of hydraulic lubricants. The gear meter’s sealed electronics and robust and reliable design ensures it can withstand the harsh subsea environment, providing critical information to operators for effective and safe drilling operations.
Blowout Prevention
Snubbing operations typically involves valve actuation during well shut-in. Due to the bi-directional nature of the hydraulic flow in actuator lines, they require meters that can read in both directions and provide encoder-like counts for position indication. The Subsea Gear Meter meets the challenges of this, as well as the harsh environmental conditions and often sour service with high H2S levels due to its robust materials of construction.
ROV Operation
Remotely Operated Vehicles (ROVs) provide a means for oil drilling companies to perform maintenance on subsea equipment, enhancing efficiencies and safety. Incorporated into these RVs are specialized instruments and tools to perform functions at the sea floor, such as valve actuation. The Subsea Gear Meter is built to withstand the extreme conditions of deep water operations at depths up to 10,000 ft and internal pressures up to 15,000 psi.
Subsea Chemical Injection
description
Subsea Valve Actuation
description
We are dedicated to supporting subsea operations with innovative, resilient solutions that ensure safety, efficiency, and reliability in the most demanding underwater environments.
A One-Stop-Shop for Industrial Flow Measurement.
From quotation to commissioning & startup, we want to make every step simple and quick.
To help us expedite your Quote Request, please fill out the below information as completely as possible. Required fields are shown with asterisk (*).
For all returns or re-calibrations, please use the RMA Form
Not Sure What You Need? Let Us Help!
Thank you for your interest in AW-Lake flow measurement products. Our experienced sales engineers are standing by to help you determine the best solution to meet your system requirements.
To help us expedite your flow application inquiry, please fill out the below information as completely as possible.
*For all returns or re-calibrations, please use this form
How Can We Support You?
We are here to help. Fill out this simple form and someone will get right back to you. Or if you prefer to reach out another way, here’s where to contact us:
AW-Lake
2440 W. Corporate Preserve Dr. #600
Oak Creek, WI 53154
Phone: 414-574-4300 info@aw-lake.com
