AW-Lake flow meters and sensors for industrial control.
AW-Lake flow measurement devices from the Products collection, including digital transmitter and flow meters.
Gear Meters
Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
AW-Lake industrial flow meters and gauges with gauges and connectors.
Meters, valves, and sensor assemblies for fluid handling.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
Advanced flow meters with digital displays for precise liquid measurement.
High-accuracy flow meters with digital readouts designed for industrial fluid measurement.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
AW-Lake pressure sensor with yellow protective cap and electrical wiring.
Industrial pressure sensor assembly from AW-Lake featuring seal kit and protective yellow cap.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
AW-Lake hydraulic valve and sensor assembly for industrial applications.
AW-Lake precision hydraulic components including valve assemblies and a digital display unit for industrial monitoring.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
AW-Lake industrial valve and sensor assembly with blue body and digital readout.
AW-Lake valve components including stainless valve bodies and RT-50 control display.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
AW-Lake ultrasonic flow meter on pipe with sensors.
AW-Lake ultrasonic flow meter system installed on a pipeline for accurate flow measurement.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
AW-Lake flow meters and sensors display for industrial automation.
AW-Lake flow meters and controls featured for industrial process monitoring and measurement.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
AW-Lake flow transmitters with digital displays in green, blue, and red.
AW-Lake flow transmitters showcase three meters with colored digital readouts for precise flow measurement.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
AW-Lake ProScan 2.0 sensor with label and stainless steel body.
ProScan 2.0 sensor from AW-Lake for flow or level sensing in industrial applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Industrial hydraulic machine with green frame and black rollers in a factory.
Fluid Power / Hydraulics
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
AW-Lake offshore drilling rig in blue ocean under a cloudy sky.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Excavator at a quarry with bucket scoop on rocky ground.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Car body on an assembly line with robotic arms spraying coating.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Industrial AW-Lake water cooling machinery with yellow frame and connected controls.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
Industrial factory interior with steel framework and overhead crane.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
AW-Lake test system in laboratory with operator seated.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Electric vehicle charging station at AW-Lake site with blue panel.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
AW-Lake tug boat on calm water with shoreline.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Industrial facility with towers and smokestack at sunset.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Blue plastic pellets being handled in a recycling facility.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aircraft maintenance in aerospace industry.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
AW-Lake flow rate transmitter with analog output.
Two AW-Lake flow rate transmitters mounted together for compact industrial monitoring.
Flow Rate Transmitter Aluminum
AW-Lake flow rate transmitter sensor for accurate industrial liquid measurement and monitoring.
Flow Rate Transmitter Stainless Steel ports
AW-Lake flow transmitter with adjustable meter for reverse flow, ideal for accurate industrial liquid measurement.
Click To See More
AW-Lake flow rate transmitter with analog output.
Two AW-Lake flow rate transmitters mounted together for compact industrial monitoring.
Flow Rate Transmitter Aluminum
AW-Lake flow rate transmitter sensor for accurate industrial liquid measurement and monitoring.
Flow Rate Transmitter Stainless Steel ports
AW-Lake flow transmitter with adjustable meter for reverse flow, ideal for accurate industrial liquid measurement.
Variable Area Flow Meters

Flow Rate Transmitter

Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring application. Available in analog or pulse outputs.

The Flow Rate Transmitter is ideal for batching, industrial process control, mobile hydraulic equipment and computer / PLC controlled hydraulic system monitoring applications. It is designed without delicate internal components to break, abrade, or corrode. The weather tight construction includes a rugged cast aluminum enclosure built to NEMA 4X standard for installation outdoors. This variable area flow meter is used to measure air, gas, oil, and water. The transmitter provides a visual indication of flow rate that matches the transmitted output for direct reading.

  • Simple to Install: All transmitters are factory calibrated and ship fully assembled. Simply install the transmitter into your system and apply power. No straight plumbing required at inlet or outlet.
  • Industry Standard Outputs: Transmitters provide proportional analog or pulse outputs that will drive popular data acquisition devices, meters and analog input cards.
  • Direct Reading: All transmitters provide a visual indication of flow rate that matches the transmitted output.
  • Weather-Tight Construction: The rugged cast aluminum enclosure is built to NEMA 4X standard and allows installation outdoors and in environments where liquid tight seals are required.
  • Rugged and Reliable: Without delicate internal components to break, abrade or corrode, the flow transmitter will provide many years of low-maintenance service
Measuring Accuracy:

Liquids
±2.0% of full scale for oil and water

Air/Gas
±2.5% of full scale in center third of measuring range;
±4% in upper & lower thirds for air and gas

Repeatability:

±1% of full scale

Flow Measuring Range:

0.1-150 GPM (0.5-550 LPM)

2-1300 SCFM (1-600 SLPS)

Maximum Operating Pressure:

Liquids
Aluminum & Brass: 3500 PSIG (240 Bar)
Stainless Steel: 6000 PSIG (410 Bar)

Air/Gas
Aluminum and brass: 600 PSIG (40 Bar)
Stainless steel: 1000 PSIG (69 Bar)

Maximum Operating Temperature:

Media: 185°F (85°C)
Ambient: 185°F (85°C)

Standard Calibration Fluids:

Oil meters: DTE 25® @ 110°F (43°C), 0.873 sg
Water meters: tap water @ 70°F (21°C), 1.0 sg
Air meters: air @ 70°F (21°C), 1.0 sg and 100 PSIG (6.8 Bar)

Filtration Requirements:

74 micron filter or 200 mesh screen minimum

Viscosity

Standard viscosities up to 110 cSt. For viscosities between 110 to 430 cSt contact factory.

Materials of Construction (non-wetted components):

Enclosure & Cover:  Painted Aluminum

Seals: Buna-N®

Window: Pyrex®

Din Connector: Polyamide

MATERIALS OF CONSTRUCTION (WETTED COMPONENTS):

Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel

Seals:

Anodized Aluminum: Buna-N® (STD), EPR, FKM, or Kalrez®

Brass: Buna-N® (STD), EPR, FKM, or Kalrez®

Stainless Steel 303: FKM with PTFE backup (STD), Buna-N®, EPR or Kalrez®

Transfer Magnet: PTFE coated Alnico

All other internal parts: Stainless steel

Electronic Transmitter Performance:
Power Requirements:

12-24 VDC

Load Driving Capacity:

4-20mA: Load resistance is dependent on power supply voltage. Use the following equation to calculate maximum load resistance: Max Loop Load (Ω) = 50 (Power supply volts – 12).

0-5 VDC: Minimum load resistance 1000.

1-5 VDC: Minimum load resistance 25 K Ω

Square Wave Pulse: Minimum load resistance 1000 Ω

Transmission Distance:

4-20mA and 1-5 VDC (regulated) are limited only by wire resistance and power supply voltage.

<200 feet recommended for 0-5 VD (regulated) C and square wave pulse.

Over-Current Protection:

Self limiting at 35mA

Resolution:

10-bit (0.1%)

Response Time:

<100 milliseconds

AW-Lake flow transmitter diagram with port sizes and media notes.
AW-Lake flow transmitter schematic showing port size range, materials, media types, and flow directions for product guidance.

Flow Rate Transmitter Datasheet


Flow Rate Transmitter Manual


HPU Builders – Smarter Monitoring with VA Meters Application Story


Poultry Processing Plant – Flow Rate Transmitter – Application Stories


Variable Area Flow Meter Brochure


Like what you see? Click below to buy online.

Buy Online

Real-World Applications


Industrial plant with flow measurement equipment and smokestacks next to timber logs.
AW-Lake flow-rate transmitter installed near timber processing facility for accurate industrial measurement.

Pulp & Paper Process Water

In the pulp and paper industry, AW-Lake’s Flow Rate Transmitters are essential for monitoring process water to help maintain the quality of the paper, optimize water usage, and reduce waste. They enable accurate control over the amount of water used in various stages of production such as pulping, bleaching, and paper forming. Additionally, flow meters assist in detecting leaks or irregularities in the system, contributing to more efficient water management and compliance with environmental regulations.

AW-Lake flow rate transmitter in industrial facility with control panel and piping.
Industrial AW-Lake flow rate transmitter setup with control panel and piping in a manufacturing plant.

Die Cast Coolants

The Flow Rate Transmitter is used to monitor the coolant flow to a die cast machine and its molds, ensuring optimal thermal management during the casting process. By providing precise real-time data on the coolant’s flow rate, the flow meter helps maintain consistent temperatures, preventing overheating and ensuring the quality and integrity of the cast parts. This accurate monitoring allows for timely adjustments to the coolant flow, enhancing the efficiency and reliability of the die casting operation while reducing the risk of defects and improving overall production performance.

 

 

Industrial poultry processing facility with flow rate equipment and workers.
Industrial poultry processing facility showcasing flow rate transmitter equipment in operation.

Water Usage in Poultry Processing

The Flow Rate Transmitter is used to measure the hot water usage in the picking area of the poultry processing plant. By monitoring the water flow rate, operators can adjust the water valves to achieve optimal water, reducing water waste and overflow. The excess water can then be recycled and reused for other purposes, such as cleaning or cooling, after being filtered and treated. This way, the flow transmitter helps the customer conserve water and energy, lower their operational costs, and comply with environmental standards.

Industrial plant with flow measurement equipment and smokestacks next to timber logs.
AW-Lake flow-rate transmitter installed near timber processing facility for accurate industrial measurement.

Pulp & Paper Process Water

In the pulp and paper industry, AW-Lake’s Flow Rate Transmitters are essential for monitoring process water to help maintain the quality of the paper, optimize water usage, and reduce waste. They enable accurate control over the amount of water used in various stages of production such as pulping, bleaching, and paper forming. Additionally, flow meters assist in detecting leaks or irregularities in the system, contributing to more efficient water management and compliance with environmental regulations.

AW-Lake flow rate transmitter in industrial facility with control panel and piping.
Industrial AW-Lake flow rate transmitter setup with control panel and piping in a manufacturing plant.

Die Cast Coolants

The Flow Rate Transmitter is used to monitor the coolant flow to a die cast machine and its molds, ensuring optimal thermal management during the casting process. By providing precise real-time data on the coolant’s flow rate, the flow meter helps maintain consistent temperatures, preventing overheating and ensuring the quality and integrity of the cast parts. This accurate monitoring allows for timely adjustments to the coolant flow, enhancing the efficiency and reliability of the die casting operation while reducing the risk of defects and improving overall production performance.

 

 

Industrial poultry processing facility with flow rate equipment and workers.
Industrial poultry processing facility showcasing flow rate transmitter equipment in operation.

Water Usage in Poultry Processing

The Flow Rate Transmitter is used to measure the hot water usage in the picking area of the poultry processing plant. By monitoring the water flow rate, operators can adjust the water valves to achieve optimal water, reducing water waste and overflow. The excess water can then be recycled and reused for other purposes, such as cleaning or cooling, after being filtered and treated. This way, the flow transmitter helps the customer conserve water and energy, lower their operational costs, and comply with environmental standards.

We work with you to increase process efficiency, reduce costly production down-time, establish real-time monitoring and control, and provide the critical tracking and record keeping necessary to meet EPA regulations.

Learn About The Merger