Meters, valves, and sensor assemblies for fluid handling.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
High-accuracy flow meters with digital readouts designed for industrial fluid measurement.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Industrial pressure sensor assembly from AW-Lake featuring seal kit and protective yellow cap.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
AW-Lake precision hydraulic components including valve assemblies and a digital display unit for industrial monitoring.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
AW-Lake valve components including stainless valve bodies and RT-50 control display.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
AW-Lake ultrasonic flow meter system installed on a pipeline for accurate flow measurement.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
AW-Lake flow meters and controls featured for industrial process monitoring and measurement.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
AW-Lake flow transmitters showcase three meters with colored digital readouts for precise flow measurement.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
ProScan 2.0 sensor from AW-Lake for flow or level sensing in industrial applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
AW-Lake paddle wheel flow meter sensor connected to a cable for flow measurement.
AW-Lake paddle wheel flow meter component with integrated housing for accurate flow measurement in pipelines.
Paddle wheel flow meter component by AW-Lake, designed for precise flow measurement and integration in fluid systems.
Click To See More
AW-Lake paddle wheel flow meter sensor connected to a cable for flow measurement.
AW-Lake paddle wheel flow meter component with integrated housing for accurate flow measurement in pipelines.
Paddle wheel flow meter component by AW-Lake, designed for precise flow measurement and integration in fluid systems.
Paddle Wheel Flow Meters
FlowStat Paddle Wheel Flow Meter
Ideal for monitoring various fluids in applications such as chillers/cooling circuits, HVAC, medical equipment, batching and industrial process control applications.
Choice of Three Port Sizes: Select from 1/2” , 3/4” or 1” NPT porting to meet system requirements. NOTE: Using reduced ID fittings will affect calibrated range.
Encapsulated Circuitry: Withstands the harshest environments.
Several Outputs Available: The standard interface is a 2-wire, 4-20mA current loop. Sensor signal may be transmitted on a low cost wire without degradation. Pulse, relay and 0-5 VDC (regulated) are also available.
Connects Directly to your Flow Monitoring Instruments: Can be connected directly to analog acquisition cards, chart recorders or other monitoring instruments, without external signal conditioning.
Simply Plumb and Apply Power: Comes factory calibrated to your flow range specifications.
Measuring Accuracy:
±2.0% of full scale
Repeatability:
±0.5% of full scale
Flow Measuring Range:
1/2“ porting: 5–15 GPM (2–60 LPM)
1/2″ porting low flow option: 2.5-4.5 (10-17 LPM)
3/4″ – 1″ porting: 15–50 GPM (60–200 LPM)
Turn Down Ratio:
10:1
Maximum Operating Pressure:
Clear Polycarbonate Cover: up to 200 PSIG (14 bar)
With Optional Stainless Steel Cover: up to 500 PSIG (34 bar)
Fluid Temperature Range:
20-225°F (-7° to 107°C)
Standard Calibration Fluid:
Water @ 70°F Temperature (21°C), 1.0 sg
Filtration Requirements:
150 micron filter recommended
FlowStat Paddle Wheel flow meter from AW-Lake with rotor cover and control options.
FlowStat paddle wheel flow meter installed in MRI and CAT scan machines ensures precise fluid flow measurement for medical imaging.
AW-Lake Application Story: Flowstat Paddle Wheel in MRI/CAT Scan Machines
Like what you see? Click below to buy online.
Real-World Applications
AW-Lake paddle wheel flow meter setup in a processing plant with piping and control panels.
Water Monitoring in Chiller System
In a cooling tower or industrial chiller, a Paddle Wheel flow meter plays a crucial role in monitoring and controlling the flow rate of the cooling water or refrigerant. It ensures that the correct amount of fluid is circulating through the system, optimizing heat exchange efficiency and preventing overheating. By accurately measuring the flow, the flow meter helps maintain proper operating conditions, detect potential issues such as blockages or leaks, and improve the overall performance and energy efficiency of the cooling system.
Industrial welder in protective gear performing a precise weld on equipment, sparks fly in a workshop setting with organized tools in the background.
Coolant in Welding Machine
In a welding machine, a Paddle Wheel flow meter is used to control the flow of coolant that prevents overheating of the welding torch and other components. By accurately measuring the coolant flow rate, the flow meter helps to maintain optimal temperatures, which prevents damage to the equipment, improves weld quality, and extends the lifespan of the welding machine.
FlowStat tankless controller in a compact electrical cabinet for efficient water heating.
Water Flow in Tankless Water Heater
Although onshore chemical injection systems are installed on land, at ground level, and in more stable conditions, they are still exposed to weather, varying temperatures, dust, and potential exposure to industrial pollutants. The JV-BB gear meter is still the best choice for its high accuracy and repeatability for consistently precise dosing of the valuable chemicals. Additionally, they handle a wide range of viscosities and flow rates.
AW-Lake paddle wheel flow meter setup in a processing plant with piping and control panels.
Water Monitoring in Chiller System
In a cooling tower or industrial chiller, a Paddle Wheel flow meter plays a crucial role in monitoring and controlling the flow rate of the cooling water or refrigerant. It ensures that the correct amount of fluid is circulating through the system, optimizing heat exchange efficiency and preventing overheating. By accurately measuring the flow, the flow meter helps maintain proper operating conditions, detect potential issues such as blockages or leaks, and improve the overall performance and energy efficiency of the cooling system.
Industrial welder in protective gear performing a precise weld on equipment, sparks fly in a workshop setting with organized tools in the background.
Coolant in Welding Machine
In a welding machine, a Paddle Wheel flow meter is used to control the flow of coolant that prevents overheating of the welding torch and other components. By accurately measuring the coolant flow rate, the flow meter helps to maintain optimal temperatures, which prevents damage to the equipment, improves weld quality, and extends the lifespan of the welding machine.
FlowStat tankless controller in a compact electrical cabinet for efficient water heating.
Water Flow in Tankless Water Heater
Although onshore chemical injection systems are installed on land, at ground level, and in more stable conditions, they are still exposed to weather, varying temperatures, dust, and potential exposure to industrial pollutants. The JV-BB gear meter is still the best choice for its high accuracy and repeatability for consistently precise dosing of the valuable chemicals. Additionally, they handle a wide range of viscosities and flow rates.
We work with you to increase process efficiency, reduce costly production down-time, establish real-time monitoring and control, and provide the critical tracking and record keeping necessary to meet EPA regulations.
AW-Lake pump system showcased for efficiency and reliability in industrial fluid handling.
You Know What You Need - Get a Quote
To help us expedite your Quote Request, please fill out the below information as completely as possible. Required fields are shown with asterisk (*).
For all returns or re-calibrations, please use the RMA Form
Not Sure What You Need? Let Us Help!
Thank you for your interest in AW-Lake flow measurement products. Our experienced sales engineers are standing by to help you determine the best solution to meet your system requirements.
To help us expedite your flow application inquiry, please fill out the below information as completely as possible.
*For all returns or re-calibrations, please use this form
How Can We Support You?
We are here to help. Fill out this simple form and someone will get right back to you. Or if you prefer to reach out another way, here’s where to contact us:
AW-Lake
2440 W. Corporate Preserve Dr. #600
Oak Creek, WI 53154
Phone: 414-574-4300 info@aw-lake.com
We’re excited to share that AW-Lake and KEM Flow Measurement are joining together as one organization. This merger builds on more than 40 years of collaboration and strengthens our ability to serve customers with expanded engineering expertise, broader flow measurement capabilities, and continued reliable support. While our brand will gradually transition to KEM Flow Measurement, our day-today operations remain unchanged. You can continue to count on the same trusted contacts, responsiveness, and partnership you know from AW-Lake.
