Meters, valves, and sensor assemblies for fluid handling.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
High-accuracy flow meters with digital readouts designed for industrial fluid measurement.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Industrial pressure sensor assembly from AW-Lake featuring seal kit and protective yellow cap.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
AW-Lake precision hydraulic components including valve assemblies and a digital display unit for industrial monitoring.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
AW-Lake valve components including stainless valve bodies and RT-50 control display.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
AW-Lake ultrasonic flow meter system installed on a pipeline for accurate flow measurement.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
AW-Lake flow meters and controls featured for industrial process monitoring and measurement.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
AW-Lake flow transmitters showcase three meters with colored digital readouts for precise flow measurement.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
ProScan 2.0 sensor from AW-Lake for flow or level sensing in industrial applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
High-precision flanged turbine flow meter designed for reliable flow measurement in various industries.
High-precision flanged turbine flow meter designed for reliable liquid flow measurement in industrial processes.
Industrial turbine flow meter with flanged ends, ideal for accurate liquid flow monitoring in various applications.
TN-F Flanged Turbine Flow Meter used for precise flow measurement in industrial applications.
Precision flanged turbine flow meter designed for reliable liquid flow measurement in industrial settings.
Click To See More
High-precision flanged turbine flow meter designed for reliable flow measurement in various industries.
High-precision flanged turbine flow meter designed for reliable liquid flow measurement in industrial processes.
Industrial turbine flow meter with flanged ends, ideal for accurate liquid flow monitoring in various applications.
TN-F Flanged Turbine Flow Meter used for precise flow measurement in industrial applications.
Precision flanged turbine flow meter designed for reliable liquid flow measurement in industrial settings.
TN-F Flanged Turbine Flow Meter
The TN-F Series of turbine flow meters can handle low viscosity fluids flowing under very high pressures where threaded connections are unsuitable. They are best suited for use with hydraulic oil, fuel and other light oils where ANSI or DN flanges are required.
The TN-F series of turbine flow meters can handle low viscosity fluids flowing under very high pressures where threaded connections are unsuitable. They are best suited for use with hydraulic oil, fuel and other light oils where ANSI or DN flanges are required. These meters have both strength and durability with many other benefits including:
Accuracy & Reliability: ±1% of reading
Electronic Integration: This meter can accept a variety of existing electronics, including the EDGE sensor.
Simplified Maintenance: Maintenance is easy with the rotor replacement kit. Rotor can be replaced in just 2-3 minutes.
Rugged & Cost Effective: All stainless steel construction and tight machining tolerances make for excellent durability/long life.
Compatible with Current Systems: Easy to install drop-in replacement of other brands of flow meters.
Measuring Accuracy:
±1.0% over full range with 1cP fluid
Repeatability:
±0.1% over full range
8 Flow Ranges:
5.0 – 5,500 GPM (across all meter sizes)
Turndown Ratio:
10:1
Max. Operating Pressure:
Up to 5,000 psi
Operating Temperature Range:
-100°F to 250°F (up to 850°F with special coil)
Calibration:
Water (NIST traceable)
End Connections:
Flange Standard ASME Raised Face (RF)
Materials of Construction:
Body: 316 Stainless Steel
Rotor: 416 Stainless Steel (CD4MCu)
Rotor Supports: 316 Stainless Steel
Rotor Shaft: Tungsten Carbide
Sleeve Bearings: Tungsten Carbide
Included Sensor:
Pulse output
EDGE Sensor:
Pulse, analog, or Modbus outputs
Digital Display:
EX rated, flow rate & total, analog and pulse outputs
Durable flanged turbine flow meter designed for reliable, accurate flow measurement in various industrial applications.
Offshore AW-Lake turbine flow meter setup with yellow safety rails and blue components.
Offshore Chemical Injection Topsides
The TN-F flanged turbine flow meter is is used in offshore topsides methanol injection to accurately measure the flow rate of methanol being injected into the well. Installed in the topside infrastructure, the flanged design ensures secure and leak-free connections capable of withstanding the harsh offshore environment. This real-time data is crucial for precisely controlling the injection process, to prevent hydrate formation and maintain optimal well performance. The robust construction and high accuracy of the flanged turbine flow meter make it ideal for such critical applications in offshore oil and gas operations.
AW-Lake turb ine flow meter system installed on industrial site with piping and support frame.
Industrial Cooling Systems
The TN-F turbine measures propylene glycol in cooling systems which acts as an antifreeze to protect from freezing during winter or when temperatures drop below 32°F. When added to a closed-loop HVAC system, the HM-F turbine measures the flow of glycol used to lower the water’s freezing point to between 0°F and -10°F. Accurate measurement helps prevent pipes from bursting, equipment from icing, and loss of performance in chillers, cooling towers, and chilled water distribution.
AW-Lake flow meter sensor installed on red pipe with yellow conduits in an industrial setting.
Commercial Fire Suppression Systems
In a building fire suppression system, a turbine flow meter ensures a reliable and accurate measurement of water flow to maintain the necessary pressure for sprinkler systems. The meter continuously monitors water supply, detecting any issues that could compromise the system’s readiness. Its precise measurement capabilities allow for correct billing and compliance with insurance regulations. The TN-F is ideal for large flow ranges, pressure containment, and wide temperature variations.
Industrial flow meter system by AW-Lake, featuring a large turbine flow meter and interconnected piping.
Produced Water in Oil-Water Separation
In the oil and gas sector, the TN-F turbine flow meter is used to monitor the flow of produced water, which is essential for effective water management and regulatory compliance. By providing precise flow data, the TN-F aids in optimizing the treatment process, ensuring that the water meets the required standards before being discharged, thereby protecting the environment and adhering to industry regulations. They also ensure proper billing for water disposal services and maintain accurate records for environmental reporting.
Offshore AW-Lake turbine flow meter setup with yellow safety rails and blue components.
Offshore Chemical Injection Topsides
The TN-F flanged turbine flow meter is is used in offshore topsides methanol injection to accurately measure the flow rate of methanol being injected into the well. Installed in the topside infrastructure, the flanged design ensures secure and leak-free connections capable of withstanding the harsh offshore environment. This real-time data is crucial for precisely controlling the injection process, to prevent hydrate formation and maintain optimal well performance. The robust construction and high accuracy of the flanged turbine flow meter make it ideal for such critical applications in offshore oil and gas operations.
AW-Lake turb ine flow meter system installed on industrial site with piping and support frame.
Industrial Cooling Systems
The TN-F turbine measures propylene glycol in cooling systems which acts as an antifreeze to protect from freezing during winter or when temperatures drop below 32°F. When added to a closed-loop HVAC system, the HM-F turbine measures the flow of glycol used to lower the water’s freezing point to between 0°F and -10°F. Accurate measurement helps prevent pipes from bursting, equipment from icing, and loss of performance in chillers, cooling towers, and chilled water distribution.
AW-Lake flow meter sensor installed on red pipe with yellow conduits in an industrial setting.
Commercial Fire Suppression Systems
In a building fire suppression system, a turbine flow meter ensures a reliable and accurate measurement of water flow to maintain the necessary pressure for sprinkler systems. The meter continuously monitors water supply, detecting any issues that could compromise the system’s readiness. Its precise measurement capabilities allow for correct billing and compliance with insurance regulations. The TN-F is ideal for large flow ranges, pressure containment, and wide temperature variations.
Industrial flow meter system by AW-Lake, featuring a large turbine flow meter and interconnected piping.
Produced Water in Oil-Water Separation
In the oil and gas sector, the TN-F turbine flow meter is used to monitor the flow of produced water, which is essential for effective water management and regulatory compliance. By providing precise flow data, the TN-F aids in optimizing the treatment process, ensuring that the water meets the required standards before being discharged, thereby protecting the environment and adhering to industry regulations. They also ensure proper billing for water disposal services and maintain accurate records for environmental reporting.
We work with you to increase process efficiency, reduce costly production down-time, establish real-time monitoring and control, and provide the critical tracking and record keeping necessary to meet EPA regulations.
AW-Lake pump system showcased for efficiency and reliability in industrial fluid handling.
You Know What You Need - Get a Quote
To help us expedite your Quote Request, please fill out the below information as completely as possible. Required fields are shown with asterisk (*).
For all returns or re-calibrations, please use the RMA Form
Not Sure What You Need? Let Us Help!
Thank you for your interest in AW-Lake flow measurement products. Our experienced sales engineers are standing by to help you determine the best solution to meet your system requirements.
To help us expedite your flow application inquiry, please fill out the below information as completely as possible.
*For all returns or re-calibrations, please use this form
How Can We Support You?
We are here to help. Fill out this simple form and someone will get right back to you. Or if you prefer to reach out another way, here’s where to contact us:
AW-Lake
2440 W. Corporate Preserve Dr. #600
Oak Creek, WI 53154
Phone: 414-574-4300 info@aw-lake.com
We’re excited to share that AW-Lake and KEM Flow Measurement are joining together as one organization. This merger builds on more than 40 years of collaboration and strengthens our ability to serve customers with expanded engineering expertise, broader flow measurement capabilities, and continued reliable support. While our brand will gradually transition to KEM Flow Measurement, our day-today operations remain unchanged. You can continue to count on the same trusted contacts, responsiveness, and partnership you know from AW-Lake.
