Gear Meters Gear Meters
Variable Area Meters Variable Area Meters
Coriolis Mass Flow Meters Coriolis Mass Flow Meters
Paddle Wheel Flow Meter Paddle Wheel Flow Meter
Helical Flow Meters Helical Flow Meters
Turbine Flow Meters Turbine Flow Meters
Ultrasonic Flow Meters Ultrasonic Flow Meters
Flow Electronics Flow Electronics
Rotary Piston Rotary Piston
Turbidity Sensor Turbidity Sensor

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Aerospace

AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.

News October 18, 2019

AW-Lake Receives 3-A Sanitary Cert for TRICOR PRO Plus Coriolis Mass Flow Meters for Use in Food and Beverage Processing

AW-Lake Company now offers a sanitary design of its TRICOR PRO Plus Coriolis Mass Flow Meters with 3-A Sanitary Certification for use in the food & beverage industry. Recognized by the USDA and FDA, the 3-A certification serves as proof that AW-Lake TRICOR PRO Plus Coriolis Mass Flow Meters meet sanitary standards necessary for food and beverage processing.

Offering a compact and high-performance flow measurement solution for sanitary environments, the mass flow meters incorporate a sensor with their DSP transmitter in a compact configuration for simple installation in a variety of applications with limited space. In addition to the smallest installation length on the market, the PRO Plus Series features a self-draining, hygienic design to provide high performance under harsh and sanitary process conditions. Units are capable of multivariable measurement including flow, density and temperature and provide fast updates for process control in the food & beverage industry.

The PRO Plus Coriolis Mass Flow Meters offer very high measurement accuracy, low pressure drop, very stable zero point, and fist-class data update rate with fast 100 Hz signal transmission. A high oscillating driver frequency provides greater immunity to process noise, more reliable measurement and higher resolution. The high natural frequency ensures these digital meters are safe in plant operations with high vibrations. Available in three flow meter sizes including ½”, 1″ and 2″, the PRO Plus Series of Mass Flow Meters offers a choice of a basic Modbus transmitter or a digital transmitter with remote or local mount.

For More Information View the Sanitary Certificate