Gear Meters Gear Meters
Variable Area Meters Variable Area Meters
Coriolis Mass Flow Meters Coriolis Mass Flow Meters
Paddle Wheel Flow Meter Paddle Wheel Flow Meter
Helical Flow Meters Helical Flow Meters
Turbine Flow Meters Turbine Flow Meters
Ultrasonic Flow Meters Ultrasonic Flow Meters
Flow Electronics Flow Electronics
Rotary Piston Rotary Piston
Turbidity Sensor Turbidity Sensor

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Aerospace

AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.

News September 19, 2017

Introducing the TW Series Turbine Flow Meter that Integrates with SignalFire Flow Totalizer as Part of a Wireless Flow Control System

Oak Creek, Wisconsin-September 19, 2017 – AW-LAKE COMPANY is pleased to introduce the TW Series Turbine Flow Meter for the most rigorous flow measurement applications. Ideal for use in or out of the oil field, the TW Series Turbine Flow Meter provides highly accurate (to ±1% of reading or better) and repeatable (0.1% repeatability) flow measurement of oils, water and some chemicals with a low cost of ownership.

Besides new installations, the meters or meter internals are cost effective and easy drop-in replacements to Kimray, NuFlo, Haliburton, Cameron and Blancett turbine flow meters in existing applications.

The TW Flow Meters are available in a wide range of sizes and easily integrated with the SignalFire Flow Totalizer as part of a wireless flow control system. Working together, the Flow Meter and Totalizer can measure, locally display and wirelessly transmit intelligent flow data to a Gateway for remote monitoring and control on a PC, PLC or other control system.

AW-Lake’s TW Series Turbine Meters are available in flow ranges from 0.6 to 5,000 gallons per minute and feature a 316 stainless steel construction, tungsten carbide rotor shaft and tight machining tolerances for excellent durability and long life. With working pressures up to 5,000 psi and fluid temperatures from -150º to 350° F, the TW Turbine Flow Meters are ideal for a variety of liquid flow applications such as:

Chemical injection: turbine flow meters work upstream, midstream and downstream.
Drilling applications: When packaged as a battery-powered solution, the TW Turbine Flow Meter is ideal for well drilling applications where the power for the drilling rigs originates from mobile generators.
Fracking and Flowback: Metering of used and reclaimed water is a primary application for these turbines. The TW Turbine Flow Meter monitors the water as well as the chemicals used to treat the water.
Natural Gas pipeline (midstream): The TW Series Turbine Flow Meter works in a variety of pipeline installations including those for metering stations, chemical injection, and offloading to smaller pipelines for delivery or truck loading stations.

For more information on the TW Series Oil & Gas Turbine Flow Meter, refer to the website at TW product page or contact Marcia Reiff, Marketing Manager, at 800-850-6110, e-mail mreiff@aw-lake.com.