AW-Lake flow meters and sensors for industrial control.
AW-Lake flow measurement devices from the Products collection, including digital transmitter and flow meters.
Gear Meters
Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
AW-Lake industrial flow meters and gauges with gauges and connectors.
Meters, valves, and sensor assemblies for fluid handling.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
Advanced flow meters with digital displays for precise liquid measurement.
High-accuracy flow meters with digital readouts designed for industrial fluid measurement.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
AW-Lake pressure sensor with yellow protective cap and electrical wiring.
Industrial pressure sensor assembly from AW-Lake featuring seal kit and protective yellow cap.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
AW-Lake hydraulic valve and sensor assembly for industrial applications.
AW-Lake precision hydraulic components including valve assemblies and a digital display unit for industrial monitoring.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
AW-Lake industrial valve and sensor assembly with blue body and digital readout.
AW-Lake valve components including stainless valve bodies and RT-50 control display.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
AW-Lake ultrasonic flow meter on pipe with sensors.
AW-Lake ultrasonic flow meter system installed on a pipeline for accurate flow measurement.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
AW-Lake flow meters and sensors display for industrial automation.
AW-Lake flow meters and controls featured for industrial process monitoring and measurement.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
AW-Lake flow transmitters with digital displays in green, blue, and red.
AW-Lake flow transmitters showcase three meters with colored digital readouts for precise flow measurement.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
AW-Lake ProScan 2.0 sensor with label and stainless steel body.
ProScan 2.0 sensor from AW-Lake for flow or level sensing in industrial applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Industrial hydraulic machine with green frame and black rollers in a factory.
Fluid Power / Hydraulics
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
AW-Lake offshore drilling rig in blue ocean under a cloudy sky.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Excavator at a quarry with bucket scoop on rocky ground.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Car body on an assembly line with robotic arms spraying coating.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Industrial AW-Lake water cooling machinery with yellow frame and connected controls.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
Industrial factory interior with steel framework and overhead crane.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
AW-Lake test system in laboratory with operator seated.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Electric vehicle charging station at AW-Lake site with blue panel.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
AW-Lake tug boat on calm water with shoreline.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Industrial facility with towers and smokestack at sunset.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Blue plastic pellets being handled in a recycling facility.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aircraft maintenance in aerospace industry.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
News January 22, 2019

AW-Lake Mass Flow Meters Optimize Marshmallow Candy Production


AW-Lake industrial machinery and instrumentation setup for fluid control.
Overview of AW-Lake components in an industrial fluid handling system.

Oak Creek, Wisconsin-January 22, 2019- Monitoring air flow during marshmallow production is critical to quality control. Too much or too little air can change marshmallow texture, appearance and physical volume. Monitoring mass flow of marshmallow after leaving process tanks also is important to ensure consistent production. Coriolis Mass Flow Meters and Thermal Mass Flow Controllers from AW-Lake monitor both the air flow into the marshmallow mixture and marshmallow mass flow to ensure consistent quality to the final end product.

Replacing electronic meters, Vogtlin High-Precision Thermal Mass Flow Controllers provide greater precision and faster response in controlling the amount of air for marshmallow production cycles. While the application requires at least 1% accuracy, the Vogtlin MEMS sensor technology offers 0.5% accuracy with faster response time. While flow rate of the clean air depends on the capacity of the production, the maximum value is around 2.5-3.0 ft3/min (70 NLPM).

TRICOR Coriolis Mass Flow Meters from AW-Lake Company provide accurate measurement of marshmallow viscosity at approximately 0.3 to 0.4% accuracy for each cycle, depending on mounting position or straight pipe length. As a medium-sized marshmallow production line that produces 20 – 25 tons/day on a 24/7 schedule, flow meters must accurately measure the amount of mixture to ensure an accurate amount of the final product. With the accurate flow measurement from the TCM 028K Coriolis Mass Flow Meter, operators can check the amount of the final product at the end of a process before the packing process with a weight system. Without using this mass flow meter, the manufacturer previously used at least three weighing machines prior to packing.

As the pump and globe valve on the production line is controlled by a programmable logic controller using 4-20mA output from the Mass Flow Meters, operators can easily change flow rate depending on production and reference the amount in each production cycle to determine the total amount of clean air. In addition to providing greater response than previous instrumentation with greater production accuracy, the Coriolis Mass Flow Meters reduce production and maintenance costs.

Read the full application story HERE. Information on TRICOR TCM 028K Coriolis Mass Flow Meters is available on the TRICOR website HERE and information on the Vogtlin Thermal Mass Flow Controllers can be found HERE.

AW-Lake offers a broad product offering to meet most flow measurement challenges. To discuss your application, contact AW-Lake Application Engineers, at 800-850-6110, e-mail sales@aw-lake.com.

Learn About The Merger