Gear Meters
Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
Variable Area Meters
Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
Coriolis Mass Flow Meters
TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Paddle Wheel Flow Meter
Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
Helical Flow Meters
Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
Turbine Flow Meters
Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
Ultrasonic Flow Meters
Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
Flow Electronics
Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
Rotary Piston
Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
Turbidity Sensor
AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Fluid Power / Hydraulics
Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.
Oil & Gas
From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.
Heavy Industrial
For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.
Paints/Sealants/Adhesives
Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.
Water Cooling
Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.
General Industrial
General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.
Test Systems
With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.
Alternative Energy
As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.
Marine
In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.
Chemical
AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.
Environmental
As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.
Aerospace
AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
The VFF Flow Meter was designed for use in Chemical Injection applications or those that require high pressure tolerance, low flow capabilities, and corrosion resistance. VFF meters are available in a wide range of flow rates; as low as 0.01 gal/hr up to 634 gal/hr. Practical applications include:
- Offshore Chemical Injection
- Hydraulic line monitoring for well control valves and leak detection
- Wash water measurement and general metering of low and high viscosity fluids
- Subsea Chemical Injection and hydraulic fluid measurement
Measuring Accuracy:
± 1.0% of reading
Linearity:
± 0.5% of reading
Repeatability:
± 0.1% of reading
Viscosity:
0.5 – 100,000 cSt or greater
Flow Measuring Ranges:
- 0.24 to 30.2 gal/day (0.01 to 4.76 gal/hr)
- 0.40 to 190 gal/day (0.17 to 7.93 gal/hr)
- 3.33 to 570 gal/day (0.14 to 23.8 gal/hr)
- 6.66 to 951 gal/day (0.28 to 39.6 gal/hr)
- 12.36 to 2536 gal/day (0.52 to 105.7 gal/hr)
- 24.73 to 5072 gal/day (1.03 to 211.3 gal/hr)
- 61.82 to 7608 gal/day (2.58 to 317.0 gal/hr)
- 123.6 to 15,216 gal/day (5.15 to 634.0 gal/hr)
Maximum Operating Pressure:
up to 15,000 psi (1035 bar)
Maximum Fluid Temperature:
-40 to 75°C (up to 100°C with remote-mounted electronics)
Ports:
NPT and Autoclave Medium Pressure as standard (others on request)
Materials of Construction:
- Body: 316L Stainless Steel (other materials on request)
- Rotor: Ultra low friction PVD coated Titanium (Nitronic-60 for MF/VFF/HF range)
- Pressure Balance Chamber: Ultra low friction PVD coated Nitronic-60
- Seals: FEP Encapsulated FKM – Inconel for pressure above 690 bar (others on request)
Recommended Display:
Real-World Applications
Offshore Chemical Injection
The VFF Rotary Piston flow meter is ideal for chemical injection in oil production where injecting various chemicals into crude oil to provide protection like scale inhibitors to prevent buildup and biocides to inhibit organism growth. The Rotary Piston meter can monitor and control chemical amounts like those used in corrosion inhibitors. This meter is ideal for measuring chemicals subsea, enduring high internal and external pressures, with over 5,000 installed globally.
High Pressure Applications
The Rotary Piston flow meter provides accurate, pressure-independent flow metering from 10 psi to 20,000 psi. This meter has successfully meters fluids such as oils, hydraulic fluids, corrosion, wax, demulsifier, pour point depressant, scale, hydrate inhibitors, biocides and oxygen scavengers. The meter bodies are produced in a variety of high grade materials which offer good chemical and environmental resistance.
Subsea Operations
At AW-Lake our VFF Rotary Piston meter is and industry standard for subsea flow monitoring. This meter is designed for longevity and easy installation and can be customized to your specifications. The Rotary Piston is ideal for measuring low flow rates and high pressures. We specialize in solutions for methanol, demulsified, corrosion inhibitor, and other chemicals.
Offshore Chemical Injection
The VFF Rotary Piston flow meter is ideal for chemical injection in oil production where injecting various chemicals into crude oil to provide protection like scale inhibitors to prevent buildup and biocides to inhibit organism growth. The Rotary Piston meter can monitor and control chemical amounts like those used in corrosion inhibitors. This meter is ideal for measuring chemicals subsea, enduring high internal and external pressures, with over 5,000 installed globally.
High Pressure Applications
The Rotary Piston flow meter provides accurate, pressure-independent flow metering from 10 psi to 20,000 psi. This meter has successfully meters fluids such as oils, hydraulic fluids, corrosion, wax, demulsifier, pour point depressant, scale, hydrate inhibitors, biocides and oxygen scavengers. The meter bodies are produced in a variety of high grade materials which offer good chemical and environmental resistance.
Subsea Operations
At AW-Lake our VFF Rotary Piston meter is and industry standard for subsea flow monitoring. This meter is designed for longevity and easy installation and can be customized to your specifications. The Rotary Piston is ideal for measuring low flow rates and high pressures. We specialize in solutions for methanol, demulsified, corrosion inhibitor, and other chemicals.
We work with you to increase process efficiency, reduce costly production down-time, establish real-time monitoring and control, and provide the critical tracking and record keeping necessary to meet EPA regulations.
A One-Stop-Shop for Industrial
Flow Measurement.
From quotation to commissioning & startup, we want to make every step simple and quick.
