Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Aerospace

AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.
News December 10, 2018

AW-Lake Solution Automates EPA Compliance of VOC Emissions for Paint Operations


Oak Creek, Wisconsin-December 11, 2018- AW-LAKE COMPANY customized a Flow Management and Reporting Solution that automated EPA compliance of VOC emissions for an OEM manufacturer’s paint operations at three regional plants in Ohio. To more accurately report VOC emissions as required by the state, the OEM manufacturer wanted to replace manual methods of gathering and recording data that often resulted in inaccurate overages with an automated process that tracked paint usage and calculated VOC emissions while populating EPA reports for electronic submission. The company also wanted visibility into daily operations as it never knew which plants performed within VOC emission limits on any given day.

AW-Lake developed an automated flow management and reporting solution that integrated its TCM 0650 TRICOR Coriolis Mass Flow Meters with customized logic controllers and EPA-reporting software to accurately track, calculate, and report VOC emissions. The TRICOR Mass Flow Meters also monitor paint flow rates, temperature and density as part of quality control.

Installed outside of paint booths, the TRICOR Coriolis Mass Flow Meters accurately convert paint mass flow into volumetric flow at a rate of 100 – 500 cubic centimeters per minute as paint flows from drums through pipelines and eventually to spray guns that dispense the paint. The TCM 0650 Mass Flow Meters are daisy chained by EtherNet cables to a factory Intranet where third-party software uses EPA formulas to calculate daily VOC totals by location and populates EPA forms for electronic submission. The flow management system also provides visibility into operations on dashboards, with bar graphs indicating current levels of VOC emissions by plant. In addition, the software maintains totals of EPA-defined limits by day, month and year for historical analysis.

Since implementing the AW-Lake flow management and reporting system, the OEM maintains accurate VOC emission levels while gaining a complete view of total operations in one control system. With access to historical data, the company can plan future activities to avoid exceeding EPA limits while operating more efficiently.

Download the application story at http://aw-lake.com/wp-content/uploads/2024/04/Application-Stories-Paint-VOC-Emissions-TRICOR-2018.pdf . Information on the TCM 0650 TRICOR Coriolis Mass Flow Meter is available at https://tricorflow.com/tricor-coriolis-meter-tcm-0650 . Or contact Marcia Reiff, Marketing Manager, at 800-850-6110, e-mail mreiff@aw-lake.com.