The TH Turbine Flow Meter is a compact, high-accuracy meter ideal for applications and industries such as fuel measurement, batching & blending, test stands, and chemical dosing.
The TG Series is ideal for applications such as fuel gas monitoring for industrial burners and boilers, compressed air metering, CNG flow tracking, and inert gas measurement in packaging and process systems. It also supports test stand use in aerospace and automotive performance testing.
Food and beverage processing plants require specialized standards different than many other industries. The TS series sanitary turbine meter meets the challenge. Used in plants around the world, the TS turbine has proved itself in industries including dairy, brewing, wine production and pharmaceuticals.
The TN-F series of turbine flow meters can handle low viscosity fluids flowing under very high pressures where threaded connections are unsuitable. They are best suited for use with hydraulic oil, fuel and other light oils where ANSI or DN flanges are required.
Ideal to withstand the demands of the most rigorous flow measurement applications and is an ideal meter for liquid flow measurement on or off the oilfield.
Compact pulse amplifier for use with all AW-Lake mechanical flow meters, certified for use in EX environments suitable for a wide range of applications.
The Coriolis ESTA Paint System enhances the transfer efficiency of spray finishing by using electrostatic forces to counteract momentum and air flow, ensuring more paint adheres to the target.
The TL Turbine Flow Meter is a compact, heavy-duty solution designed to handle pressures up to 5,000 PSI. With NIST-traceable calibration, it delivers reliable and accurate flow measurement for demanding applications.
The HM-U Hydraulic System Turbine Flow Meter was designed specifically to measure hydraulic fluids for precise regulation and control of flow rates in hydraulic systems.
This helical meter w/ built-in sensor is capable of 3 times the resolution of our SRZ-BB, making it ideal for small volume dosing of highly abrasive fluids.
SRZ-TC Helical positive displacement flow meter with tungsten carbide sleeve bushing were designed for measuring high viscosity, abrasive, and filled fluids as well as lubricating and non-lubricating fluids. Temperature fluctuations and the resulting change in viscosity of the fluid only marginally affect the measuring accuracy of these helical gear flow meters.
SRZ-BB Helical PD flow meters were designed for measuring lower viscosity, non-abrasive fluids, such as in lubrication systems.
The Portable Ultrasonic Flow Meter is ideal for on-demand measuring the flow rate of clean, non-aerated fluids in full pipes such as water, chemicals and oils.
The TRP High Temperature Turbine Flow Meter delivers the accuracy required in even the toughest applications with contaminated or extremely hot oil heat transfer media, such as are found in the metal die casting industry.
For accurate, reliable flow measurement of cooling water, condenser water and water/glycol solutions.
The TCMH 0450 High Pressure Hydrogen Coriolis Mass Flow Meter is the world’s first MI-002 / OIML137 certified Coriolis flow meter for hydrogen dispensing and is offered in three pressure ratings: 6,000 psi, 10,000 psi and 15,200 psi. The U-shape tubes are made from Sandvik® Alloy HP 160.
The TCM “CLASSIC” Series of Coriolis Mass Flow Meters meets general industrial requirements with out-of-the-box ease of use.
JV-UF Next-Generation Positive Displacement Flow Meter is ideal for low viscosity fluids (solvents, scale inhibitor, methanol, DEF).
JVH Next-Generation Positive Displacement Flow Meter is ideal for measuring oils, fuels, additives, and chemicals in hazardous areas and at pressures up to 15,000 psi (1035 bar).
JV-TC Next-Generation PD Flow Meter is ideal for measuring non-lubricating and filled fluids with its specialized gear/shaft design, increased pressure ratings, and enhanced flushability.
