(414) 574-4300
Request Quote Buy Online

Gear Meters

Gear meters specifically spur gear, are ideal for low flow rates, viscous fluids, and measurement of flows involving starts and stops or pulsing.
Learn More

Variable Area Meters

Variable Area flow meters are a type of rotameter that measure oils, liquids or gases by relating linear displacement of an internal “float” or sharp-edged orifice plate to a corresponding flow rate.
Learn More

Coriolis Mass Flow Meters

TRICOR Coriolis flow meters are highly accurate and repeatable multi-variable instruments that measure mass flow, density, and temperature with calculated volumetric flow and feature a very easy user interface.
Learn More

Paddle Wheel Flow Meter

Operating much like a turbine flow meter, the paddle wheel flow meter consists of a freely rotating wheel which is outfitted with magnets on the blades or “paddles” of the wheel.
Learn More

Helical Flow Meters

Helical gear ("screw-type") flow meters are designed for measuring highly viscous, abrasive, and filled fluids including lubricating and non-lubricating media, such as polyurethane, polymers, greases and oils.
Learn More

Turbine Flow Meters

Axial turbine flow meters are designed with wear resistant internal components to provide trouble-free operation and a long service life in a wide variety of industrial applications.
Learn More

Ultrasonic Flow Meters

Non-contact ultrasonic flow meters for accurate, instantaneous mass & volumetric flow rate measurement of clean, non-aerated fluids in full pipes such as water, chemicals, and oils.
Learn More

Flow Electronics

Electronics coupled with our mechanical flow meters deliver flow data in your preferred format, whether a local display, remote transmitter, or simple pickup.
Learn More

Rotary Piston

Rotary Piston positive displacement flow meters are ideal for use in applications with very low flow rates and high pressures, such as offshore chemical injection applications.
Learn More

Turbidity Sensor

AW-Lake's ProScan Turbidity Sensor is ideal for detection of material transitions, monitoring turbidity, and measuring product concentration, such as in dairy processing, juice processing, and brewing operations.
Learn More

Fluid Power / Hydraulics

Flow meters used to monitor flow readings in fluid power systems are essential to properly monitoring your process, diagnosing system errors, and ensuring system performance. Our expertise in this area goes back decades with numerous flow meters for the hydraulics and fluid power system industry.

Oil & Gas

From corrosive subsea environments, offshore production platforms, onshore oil fields, or refineries we have the flow expertise to tackle these tough jobs. Difficult oil and gas flow metering challenges like high pressures, pulsating flows, corrosive media and harsh environments are our daily business.

Heavy Industrial

For challenging industrial environments like mining, steel & paper mills, and industrial vehicles we offer flow meters with easy flow paths to run thick materials, rugged meter bodies that handle extreme conditions and designs with high shock and vibration resistance.

Paints/Sealants/Adhesives

Automotive plants and their Tier-1 suppliers have been using AW-Lake flow meters for 40+ years to monitor usage of paints, coatings, adhesives, lubricants, and other fluids to maintain strict process control and manage operational costs. Flow meters in these areas must be capable of measuring a wide range of materials.

Water Cooling

Monitoring process cooling systems, including industrial cooling circuits and HVAC systems, helps maintain your plant or building efficiency, conserve energy, and improve the bottom line. Constant monitoring and control of these systems can easily be done using flow monitoring and control instrumentation from AW-Lake.

General Industrial

General industrial plants around the world have been using AW-Lake flow meters to maintain their process operations, plus they have integrated our meters as a vital part of their end product. Our broad portfolio of flow measurement equipment provides solutions to your paint operations.

Test Systems

With increasing product complexity, tighter regulations, and growing demands on companies to reduce operating costs and improve product quality, there is more focus on test and measurement procedures and equipment.

Alternative Energy

As the world shifts towards sustainable practices, the demand for efficient energy production methods intensifies. AW-Lake flow meters are used in many ways within renewable energy sectors such as solar, wind, hydro, and biofuels.

Marine

In a field where fuel consumption attributes to most of the total operating costs, it is critical for marine ship owners and operators to monitor their fuel systems. Accurate fuel consumption is key to understanding how and where to find areas to improve efficiency and control costs.

Chemical

AW-Lake understands the challenges and intricacies of chemical / petrochemical process monitoring with flow meters. We have the depth of experience with corrosive, aggressive liquids and gases that you need in your flow measurement partner.

Environmental

As the the world continues to examine ways to lesson our impact on the environment and develop new technologies to support those efforts, flow measurement enters the conversation more and more.

Aerospace

AW-Lake flow meters are trusted in the aerospace and aviation industry, where they ensure precise measurement and control of fuel, hydraulic fluids, and other critical liquids and gases. They play a vital role in maintaining optimal performance, ensuring safety, and enhancing fuel efficiency.

Our Products

The flow measurement products produced and/or supplied by AW-Lake include the following:

Reset Filters
Reset Filters

CLASSIC Series TCM Coriolis Meters

The TCM “CLASSIC” Series of Coriolis Mass Flow Meters meets general industrial requirements with out-of-the-box ease of use.

CLASSIC Series TCM Coriolis Meters

Basic Variable Area Flow Meter

Basic Variable Area Flow Meter is ideal for monitoring pump performance as well as measuring fluids in hydraulic circuits and cooling systems.

Basic Variable Area Flow Meter

RT-30 Flow Transmitter – EX & Non-EX

Ideal for any industry where a local rate & total display is required, such as in offshore chemical injection, hydraulic fracturing, or industrial paint spray booths.

RT-30 Flow Transmitter – EX & Non-EX

TRG Standard Turbine Flow Meter

Ideal turbine flow meter for monitoring solvents and other lower viscosity fluids, such as antifreeze and fuel measurement.

TRG Standard Turbine Flow Meter

FlowStat Paddle Wheel Flow Meter

Ideal for monitoring various fluids in applications such as chillers/cooling circuits, HVAC, medical equipment, batching and industrial process control applications.

FlowStat Paddle Wheel Flow Meter

The EDGE Flow Sensor – with Bluetooth

Ideal for use with all AW-Lake gear meters and turbine flow meters in applications requiring an analog, pulse, or Modbus output.

The EDGE Flow Sensor – with Bluetooth

ClearView Flow Meter

ClearView Flow Meter is an economical way to monitor water flows, observe case drain flows and verify pump outputs.

ClearView Flow Meter

RT-50 Flow Rate Transmitter

Ideal for any industry or flow measurement application where a local rate and total display is required and in locations where equipment is exposed to the elements.

RT-50 Flow Rate Transmitter

Intrinsically Safe ECO Flow Sensor

Compact pulse amplifier for use with all AW-Lake mechanical flow meters, certified for use in EX environments suitable for a wide range of applications.

Intrinsically Safe ECO Flow Sensor

Flow Rate Alarm

Flow Rate Alarm ensures sufficient flows of coolants and lubricants in mobile hydraulic equipment and industrial process control. Field adjustable alarm setting available in single or duel switch.

Flow Rate Alarm

Bi-Directional Flow Meter

Bi-Directional Flow Meter is ideal for monitoring pump performance as well as measuring fluids in hydraulic circuits and cooling systems where flow is measured in both directions.

Bi-Directional Flow Meter

FlowStat ES Paddle Wheel Flow Meter

Ideal for economically monitoring various fluids in applications such as chillers/cooling circuits, HVAC, batching and industrial process control applications.

FlowStat ES Paddle Wheel Flow Meter

HM-F Flanged Turbine Flow Meter

Ideal for low viscosity fluids flowing under extremely high pressure, such as hydraulic and fuel systems and offshore chemical injection systems.

HM-F Flanged Turbine Flow Meter

You Know What You Need - Get a Quote

To help us expedite your Quote Request, please fill out the below information as completely as possible. Required fields are shown with asterisk (*).

For all returns or re-calibrations, please use the RMA Form

Not Sure What You Need? Let Us Help!

Thank you for your interest in AW-Lake flow measurement products. Our experienced sales engineers are standing by to help you determine the best solution to meet your system requirements.

To help us expedite your flow application inquiry, please fill out the below information as completely as possible.

*For all returns or re-calibrations, please use this form

How Can We Support You?

We are here to help. Fill out this simple form and someone will get right back to you. Or if you prefer to reach out another way, here’s where to contact us:

AW-Lake
2440 W. Corporate Preserve Dr. #600
Oak Creek, WI 53154
Phone: 414-574-4300
info@aw-lake.com

"*" indicates required fields

Please enter a number greater than or equal to 1.
Address*

"*" indicates required fields

1Company Information
2Tell Us About Your Application
Address*

"*" indicates required fields

Address*
This field is for validation purposes and should be left unchanged.